Wireless Smoke Alarms,Wireless Smoke Detectors,Smoke Alarm Systems Manufacturers,Smoke Detector Systems,India

Adapting measures against the threat of smoke and fire has become very essential in every industry. With growing concerns over the safety measures, smoke and fire detection systems can be one of the most effective installation. Our wide range of fire security like fire smoke alarms, wireless fire sprinkler systems, automatic fire fighting system, fire hydrant systems, wireless fire protection equipment, fire alarm systems, also provide fire alarm software have a built-in wireless transmitter which makes the system total wireless. They are ideal solution for difficult to wire locations, room aesthetics or even hazardous materials, such as asbestos above a drop ceiling.

Installation of these wireless security system provides a very cost effective solutions with features which are even not possible in wired systems. Our wireless smoke alarms and wireless smoke detectors can be programmed in any zone between 1 to 999 nos. The power radio emitter attached with it gets activated by presence of smoke and then it sends radio waves to the panel. The panel automatically displays the same zone in which it has been programmed. If required, the programmed zones can be changed to another zone. There is also a inbuilt hooter in the detectors as well as radio emitter that functions with call button ( manual call point ).

Important components

Wireless Smoke Detectors

Specification For Wireless Intelligent Smoke Detectors
The wireless smoke detectors or wireless smoke alarm systems are programmable between any number of zones from 1 to 999. The detectors are equipped with an in-built hooter and test button. So when ever detector becomes activated through smoke it sends radio waves to the panel. Panel display the same zone in which it has been programmed. Programmed zone can be changed to another zone if required. There is also an inbuilt hooter in the detectors as well as radio emitter. Each emitter is workable with call button ( manual call point ).

Sensitivity:	As per NFPA 72
Model No.:	SS 168
Specification:	EN54 Pt7
Description:	Wireless optical smoke sensor
Compatibility:	All KARSAN analogue system through radio waves
Mounting:	Plugs into surface base
Monitoring:	Continuously self checking
Indication:	Alarm
Detection Principle:	Photo electric light scatter
Operating Voltage:	9 volts DC (Alkaline batteries)
Battery Backup:	3 years
Addressing Method:	Unique address embedded in detector
Environmental Application:	Indoor use
Temp Range:	10OC to 70OC
Humidity Range:	20% to 95% RH (non condensing)
Construction Material:	Moulded ABS
Dimensions:	106mm (Dia) x 36mm (H)
Colour:	White

Send Us Enquiry

Wireless Security System

We make available a complete security system that can act as a total safety measures which include wireless fire sprinkler systems, wireless smoke detector and wireless fire alarm systems. All of them have advance features assembled in them offering advantages over general security systems. For example, PIR Sensor can send signals to panel directly up to 5 K.M. without wiring Magnetic switch, Vibration sensors & Glass break sensors can be attached with same / independent wireless alarm panel. Similarly, there are several other advanced features that can serve our clients in a better way.

Send Us Enquiry

Wireless Panel

Standard panels are 99 & 999 zone panels. Panel has ability to receive radio waves. It displays the zones whenever receive the signal from the detector. There is a inbuilt siren in the panel. Auto dialer is also the feature of this panel. It can save diff. telephone nos. and start dialing when ever it becomes activated.

Specification For Intelligent Wireless Control Panel

999 Zones Fire Alarm Panel

Description:	Wireless Control Panel
Compatibility:	All KARSAN radio emitter through radio waves
Indication:	Alarm 110 db
Principle Function:	Displays different zones of smoke sensors transmitted by radio emitter.
Operating Voltage:	24 volts DC ( Rechargeable batteries) Two pin 5 Amp socket is required to be connected for charging
Power Backup:	12 Hours
Addressing Method:	Digital nos. display on screen
Environmental Application:	Indoor use
Temp Range:	10OC to 70OC
Humidity Range:	20% to 95% RH (non condensing)
Construction Material:	M S Body
Colour:	Black

Send Us Enquiry

Wireless Manual Call Point & Emitter With Hooter

Radio emitter reads the separate zones of each detector lying at a distance of 85 feet and push the signal which is read by panel. Manual call point can activate radio emitter. So as soon as emitter receives signal from the manual call point siren of 85 db starts and also emitter sends signal to the panel.

PS. - ALONG WITH SMOKE DETECTORS THERE IS POSSIBILITY TO INSTALL MAGNETIC SWITCH , PIR SENSORS FOR SECURITY SYSTEM ALSO WITH THE SAME PANEL

Specification For Intelligent Wireless Radio Emitter Cum Hooter

Description:	Wireless Hooter
Compatibility:	All KARSAN analogue smoke sensors through radio waves
Mounting:	Plugs into surface base
Indication:	Alarm 85 db
Principle Function:	Reads different zones of smoke sensors and push the signals so as to collect and read by wireless panel
Operating Voltage:	15 volts DC ( Rechargeable Alkaline batteries) Two pin 5 Amp socket is required to be connected and charging
Power Backup:	12 Hours
Addressing Method:	Unique address embedded in detector
Environmental Application:	Indoor use
Temp Range:	10OC to 70OC
Humidity Range:	20% to 95% RH (non condensing)
Construction Material:	Moulded ABS
Colour:	White

Send Us Enquiry

Wireless Automation Systems

With the help of radio emitter now it is possible to transfer the signal of any equipment like flow switch, pressure switch, temp. gauges etc. on / off signal as wireless to the distance of 1 to 5 K.M.

This wireless system is already working very successfully in nos. of very prestigious commercial buildings and factories in India & abroad.

Send Us Enquiry

Comparison of Wireless With Wired Smoke Detection / Security Systems

NO wiring and conduiting works on radio waves. Lot of concealed wiring is required in case of wired system.
Each detector works as a independently unit. So in case of non working of particular detector it does not have any effect on the system. But in case of Wired System Complete zone / system becomes effected due to damaging of wire or failure of connection.
Zero maintenance and no AMC required. AMC is must and tedious job in case of wired system.
Immediate Installations. 200 nos. of detectors with panel can be installed in a single day even when building is occupied. Appx. 20 days are required in case of wired system.
Can be installed in running office complex / factory etc.
Complete flexibility. Any time there is a requirement for any modernization of the building. Any detector / panel can be shifted as per requirements.
Very - very competitive prices of wireless panel. Wired panel with equal nos. of zones cost five times more than the wireless panel.
Saving of cost from 10 to 60 % at the time of installations and 90% saving in running cost.
Easy testing while every time it is practically not possible to test the system by generating smoke. A test button is available with each wireless smoke detectors and just pressing the button is sufficient for working of detector, panel and emitter.
In case of non working / failure of main control panel in wired system whole system will be held up. But the complete system will be working in case of non working of panel

Long Range Wireless Detection /Security System